Spec Sheets
Technical drawings for the Viking Plastics lint trap range. These are the drawings to submit with your trade waste application — your local water authority will generally want to see the pre-treatment device specified before approving the connection.
If you need a drawing for a custom size, a site measure, or support with an authority submission, get in touch or call 1800 143 143.
Lint Traps
NP44AG
Compact lint trap, 1–3 machines. Removable basket and fixed basket. Product details.
Technical Drawing 2D Section View 3D View
NP46AG
3–5+ machines. Horizontal removable stainless steel screen with fixed vertical screen. Product details.
Technical Drawing 2D Section View 3D View
VP890-1
Access lid with full horizontal stainless steel screen.
Lint Trap, Above Ground
Custom sizes, 100 L and 200 L.
Sizing And Selection
The lint trap sizing guide covers model selection against machine count, discharge temperature and lint load, along with the drainage limiting factors that constrain any installation.
For a precise selection, send us the machine specifications, the total drain flow rate in litres per second, and your site constraints.
Cooling And Straining
Where discharge temperature exceeds the trade waste limit, an averaging and cooling pit is generally required ahead of the connection to sewer. Dimensions and part numbers for the VP15 and VPT15 series, above and below ground, are listed on that page.
Other Viking Products
Viking Plastics also fabricates grease traps, hair traps, silt arrestors, mixing tanks, pump tanks, stormwater and aquaculture solutions. See other products or visit vikingplastics.com.au.